You can create a safer industrial environment by attaching various cameras to the TOP, checking video while working, or saving necessary video.

 

[Types of Cameras]
You can attach USB cameras, IP cameras, video cameras, thermal cameras, and so on.

 

1. TOPR Premium models have a built-in camera at the top center of the front.
2. USB camera: camera attached to the USB port of the TOP
3. IP camera: camera attached to the Ethernet port of the TOP
4. Video camera: camera attached to the Video port of the TOP
5. Thermal camera: a thermal camera that expresses temperature, attached to the Ethernet port of the TOP

 

 

1. TOPR Premium models: built-in front camera, video camera, USB camera, IP camera, thermal camera supported
  - Display units: TOPRD1520X, TOPRD1220X, TOPRD1020S, TOPRD0820S
  - Process units: TOPRP20D

 

2. TOPR Standard models: USB camera, IP camera, thermal camera supported
  - Display units: TOPRD1510X, TOPRD1210S, TOPRD1010S, TOPRD0810S
  - Process units: TOPRP10D

 

3. TOPRX models: thermal camera supported
   - TOPRX1500XD, TOPRX1200XD, TOPRX1200SD, TOPRX1000SD, TOPRX1000VD, TOPRX0800SD, TOPRX0800VD, TOPRX0500VD

 

 

[Camera Video Display]
By registering a camera/thermal camera object, you can display/save video.

1. By registering a camera object, you can display the video from built-in front/video/USB/IP cameras on the screen.
  - Cam: Built-in front camera of TOPR Premium model
  - CCTV: Video camera attached to the VIDEO port of TOPR Premium model
  - USB external camera: USB camera
  - IP external camera: IP camera

 

Only one camera object can be registered per screen.
That means basically only one camera video can be displayed per screen.
However, if the registered camera object is an IP camera, you can additionally display one more camera video from other cameras (USB/video/front camera).

 

2. Using thermal camera objects, you can display temperature visualization video from thermal cameras on the TOP screen.
Up to four thermal cameras can be attached and displayed on the screen.
 

---------------------------------------------------------------

 

 

Camera video can be stored in TOP device memory, USB memory, SD memory, or the option module TOPR_OPT_CAM32 memory.

 

  - For video storage media, SD memory or the option module TOPR_OPT_CAM32 is recommended over the TOP device memory.

 

Register on the camera object’s [Key] page as below. Press the [Record Start] key to start recording, and press [Record End] to stop recording.

[Snap Shot] captures the video and saves it as an image.

 

 

Storage media is controlled on the camera object’s [Camera] page.

If [Use Storage Media]-[SD Card] is checked, recording is saved to SD memory or TOPR_OPT_CAM32 memory; if unchecked, it’s saved to the TOP device memory.

 

SD memory and TOPR_OPT_CAM32 memory (option module) cannot be used simultaneously.

On the TOP device menu screen under [Control Panel]-[SD Card], select which memory to use as follows:
If camera object storage media is set to SD Card, and [Camera Data] is set to SD_Card1, video is saved to the SD card inserted in the SD slot, and if set to EXT_Cam32, video is saved to the option module TOPR_OPT_CAM32 memory attached to the EXT port.

 

To store video on USB memory, instead of using the camera object’s [Record Start] key, create a separate switch registered under [Effect and Action] page as [Special] - [Camera] - [Camera Record Start] and set the save location to USB.

 

 

 

When USB memory is attached to TOP, USB menu appears on screen.
Execute [Cam Capture/Cam Movie] in the USB menu.
If USB menu is closed, press the [USB] button in the top menu to reopen.

 

[Cam Capture] copies camera screenshot data to USB memory.
[Copy All] copies and moves data; [Move All] cuts and moves data.

 

[Cam Movie] copies camera video data to USB memory.
[Copy All] copies and moves data; [Move All] cuts and moves data.

 

This is a direct English translation of the detailed explanation about camera types, models, video display, recording, and USB saving for the R product TOP system.z