For R Series devices, the latest printer drivers no longer support general printers.
Screen printing is only possible when using "an existing compatible printer".

 

※ Note: The latest printer drivers can be used with TOP-PCVIEW and TOP-VIEW after driver installation.

 

1. Connect a Compatible Printer
 - Connect a supported printer directly to the TOP HMI device.

 

2. Access the Printer Settings on the TOP Device
   1) Open the Menu Screen:
      - Pull down the top menu from outside the upper edge of the display.
      - Tap the [Exit] button (first button in the top menu) to open the main menu.

 

   2) If the interface is in Korean, tap the [가] button at the bottom to switch to English ([A]).

 

   3) Navigate to [Control Panel] - [Device] - [Printer].
      - If a compatible printer is detected, its model name will be displayed in the list.

 

 

3. Configure the Print Action in TOP Design Studio
   1) In TOP Design Studio, open the object’s [Effect & Action] settings.

 

   2) In the Action tab, configure the function so that when the specified condition is met, the current full screen is printed.

 

 

[Additional Information – Using a Roll Printer]
For roll printer (mini printer) usage, refer to the setup example provided on the M2I website:

   - Path: Service - Download - Manual/Design - Example Files - How to Set Up a Roll Printer (Mini Printer)

   - Direct Link: https://www.m2i.co.kr/uploaded/board/engexample/d_723168c23c343cb0e00523a907ffe96d0.tds